Axis AXIS 5900 User Manual Download

Page: 28 / 160

Adding Printers in Windows

AXIS 5900 User’s Manual

client computer that wants to print. Each client computer must install the

appropriate printer drivers in order to print properly.

SNMP Device Index

When using the TCP/IP protocol (and if the printer driver permits), the

print server can use

SNMP Status

to find out if the printer is ready to

accept a new job. See

“SNMP Device Index”

on page 147.

Adding Printers in Windows 2000 / XP / 2003 using AXIS AddPrinter Wizard

AXIS AddPrinter is a Wizard that locates your network printers and helps

you install them in your Windows environment. When you have

completed the Wizard, the network printer is ready for use. To install a

network printer you must be logged in as an Administrator or be a

member of the Administrators' group.

1. Install AXIS AddPrinter Wizard on all Windows 2000 / XP / 2003

workstations that will print via the print server.

2. Before you continue, ensure that the print server is properly connected to

the printer, network and power.

3. Start AXIS AddPrinter. Click

Next

. The Wizard will perform an automatic

search for all Axis network printers, which is indicated by the progress bar
at the bottom of the screen.

4. Select a printer from the

Select Network Printer list

and click

Next

If the printer does not appear, see

Easy Access to All Network Printers

below.

In Windows 98 and Me, AXIS Print Monitor must be installed on

all (printing) client

computers

for Peer-to-Peer printing.

Summary of Contents for AXIS 5900

































































































































































Search results

Summary of Contents for AXIS 5900

Reviews:

Related manuals for AXIS 5900

Brands by name

Popular brands

Axis AXIS 5900, User Manual

Search results

Summary of Contents for AXIS 5900

Reviews:

Related manuals for AXIS 5900

Brands by name

Popular brands