Management and Configuration
104
AXIS 5900 User’s Manual
Example:
Follow the instructions below to convert ASCII print data to PostScript for
logical printer PR2:
1. From the print server’s internal Web page, select
Admin | Logical Printer
Settings.
2. Select the
Printer2
tab.
3. Set the
Printer Language Translation
parameter to
POSTSCR
.
4. Click the
OK
button.
If you select the parameter value
AUTO_PS
, the print data for every print
job is searched and if any ASCII data is found, it is translated into
PostScript. This setting is recommended if you are not sure if the print
data is ASCII or PostScript.
PostScript Settings
When a logical printer is set for PostScript conversion, you must specify
the following:
•
page size
•
page orientation
•
page formats
•
which font is to be used
The default page size is A4 and the default page orientation is Portrait,
while the page format parameters are as follows:
The PostScript font can be any font that is installed in the printer; if no
font is specified, Courier will be used.
Example:
Follow the instructions below to set the PostScript parameters for logical
printer PR2:
1. From the print server’s internal Web page, select
Admin | Logical Printer
Settings.
2. Select the
Printer2
tab.
3. Set the
Printer Language Translation
parameter to
POSTSCR
.
4. Set the
PostScript Page Size
parameter to
LETTER
.
5. Set the
PostScript Page Orientation
parameter to
LANDS
.
Page Format Parameter
Default Value
Lines per page
66
Characters per line
0
0=disable line wrap
Characters per inch
10.0
Lines per inch
60
60 = 60 lines per inch
Left margin
30
30 = 3.0 mm
Top margin
50
50 = 5.0 mm