Axis 5570e, Installation Manual

Page: 13 / 182

AXIS 5570e Installation Guide Page 13
EN
GLISH
AS/400 TN5250E Printing (SCS over IP)
To establish communication with the TCP/IP network, you must first assign an IP address to your AXIS 5570e print
server. Refer to
Assign an IP address .
Follow these instructions to configure your AS/400 and AXIS 5570e for TN5250E printing:
Important!
The AS/400 Host System Checklist
Note:
1. Type
WRKCTLD *VWS
on the AS/400 command line and press Enter . Determine the number of
auto-configured virtual devices on your AS/400 system. Press
F3
.
2. Type
DSPSYSVAL QAUTOVRT
and press Enter . Make sure that the parameter is greater than the number of
auto-configured virtual devices. Press F3 .
3. Type
DSPSYSVAL QCHRID
and press Enter
.
Note the system language (code page) for future reference. Press
F3 .
4. Type
WRKTCPSTS *IFC
and press Enter to determine the IP address of the AS/400.
Press F3 .
Configuring the AXIS 5570e
Follow the instructions below to configure the AXIS 5570e for TN5250E printing in the AS/400 environment using
a Web browser:
1.
Start a Web browser and enter the IP address or the host name of the AXIS 5570e in the Address/Location
Step Action Described in
1. Configuring the AS/400 host system The AS/400 Host System Checklist
2. Configuring the AXIS 5570e Configuring the AXIS 5570e
3. Completing the installation Verifying the Communication Link
• Make sure that the AS/400 host is running OS/400 V3R2 or higher with TCP/IP support installed and configured.
• Make sure that the latest PTFs are installed. Information about which PTFs to use can be obtained from
http://as400service.rochester.ibm.com/
For future reference, enter the values below in the AS/400 and Mainframe Parameter Checklist .