Adding Printers in NetWare
64
AXIS 5400+ / AXIS 5600+ User’s Manual
7. Select the newly created queue from the queue list.
8. Select
Print Server Mode
Print Server Mode
Print Server Mode
Print Server Mode
or
Remote Printer Mode
Remote Printer Mode
Remote Printer Mode
Remote Printer Mode
. If you selected
Server Mode
Server Mode
Server Mode
Server Mode
, advance directly to step 11, otherwise continue with step 9.
9. Select an appropriate NetWare Print Server name, that will be associated
with the Axis Network Print Server, by using the
Browse...
Browse...
Browse...
Browse...
button.
Notes:
10. If you want to define a remote printer number slot manually, check the
Manual
Manual
Manual
Manual
box and type the desired number in the box.
11. Click the
OK
OK
OK
OK
button to return to the Network Environments window.
Basic Queue-based printing over IP
Axis print servers with software version 6.0 or later allow users to print in
a Pure IP environment using traditional queue-based printing (which
usually uses the IPX transport protocol). Note that only NDS queue-based
printing is supported.
In the NetWare Pure IP environment, you must use the NetWare
Administrator to create the printer, print server and queue objects.
Installing the
Axis Network Print
Server
Follow the instructions below to install the Axis Network Print Server in
the NetWare Pure IP environment:
1. Start the Configuration Wizard from the
User mode
User mode
User mode
User mode
in the Axis Network
Print Server Web interface.
2. Click your way through the Wizard until reaching the
NetWare
NetWare
NetWare
NetWare
page.
3. Set the parameters on the NetWare page:
• PSERVER NDS Tree (example: NW5TREE)
or
or
or
or
PSERVER NDS File Server: (example: FILESERVERNAME)
• PSERVER NDS Distinguished Name:
(example: AXISXXXXXX.<context>, where <context> is the container
where you want to create your print server)
• You cannot type or edit the name manually.
• Make sure that you have PSERVER.NLM running if you selected Remote Printer Mode in step
8.
