Axis 5400+ User Manual Download

Page: 105 / 164

Configuration Possibilities

AXIS 5400+ / AXIS 5600+ User’s Manual

105

9. In the

IP Address, Host Name or URL

field, type the address of the Axis

Network Print Server to which the destination printer is connected. The URL
will automatically appear in the

Port Name

field as well:

(

Example: http://171.16.5.218:631/LPT1

if you want to address the parallel

port). Click

10. The Wizard will confirm the information you have entered. Click

Finish

complete the installation and go back to the

Available Ports

list.

11. The IPP printer port list is now available in the

Available Ports

list. Click

Next.

12. Next, choose a suitable driver for the destination printer and install it. Click

13. You will be asked if you want the newly added printer to be your default

printer and if you want to share the printer on your network with other
users. Choose the alternatives that suit your printing needs and click

Finish

to complete the installation.

Summary of Contents for 5400+





































































































































































Search results

Summary of Contents for 5400+

Reviews:

Related manuals for 5400+

Brands by name

Popular brands

Axis 5400+, User Manual

Search results

Summary of Contents for 5400+

Reviews:

Related manuals for 5400+

Brands by name

Popular brands