Adding Printers in Macintosh
38
AXIS OfficeBasic User’s Manual
1. Open the
Chooser
from the Apple menu.
2. Select a network printer driver — any LaserWriter will do.
3. Select the printer port ending with
_CFG
.
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText.
6. Write a text file containing the parameters you want to set
:
Note:
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for printing
documents.
9. Close the Chooser.
Note:
BINARY_TYPE_1.
:BCP
INT_ADDR.
:192.168.3.191
ATYPE_1.
:EPSONLQ2
Parameters that you do not want to set should be excluded from the text
file. Refer to the Parameter list in this manual for information about which
values that are valid for each parameter.
The _CFG port disappears 60 minutes after the print server has been
powered on. If you want it to reappear, you must restart your print server.
