Axis 14363, User Manual

Page: 30 / 95

Section 5: Configuration Parameters
26 AXIS AFP IOP User’s Manual
C06 Line Spacing ...............................................................[c06 Line Spacing]
Controls line spacing for non-IPDS Coax modes. In LU-1 mode the line
spacing can be changed by commands from the host.
IPDS Parser syntax (with default setting):
COAX_C06 = 0;
C08 Monocase/Dualcase...............................................[c08 Mono/Dual-case]
Use this option to force upper case printing.
Used in DSC/DSE modes only.
IPDS Parser syntax (with default setting):
COAX_C08 = 0;
C09 Lines Per Inch (LPI)..................................................[c09 Lines per Inch]
Selects how many lines to print per inch. In LU1-1 mode this sets the
default power on value. In DSC/DSE modes this setting cannot be
overwritten.
IPDS Parser syntax (with default setting):
COAX_C09 = 0;
• 0 [Single Space] Single-line spacing
1 [Double Space] Double-line spacing
• 0 [Dualcase] Normal dualcase printing.
1 [Uppercase] Always use upper case.
• 0 [6 LPI] 6 LPI(8.57 LPI when COR active)
1 [8 LPI] 8 LPI(11.43 LPI when COR active)
2 [6.5 LPI] 6.5 LPI