Axis 14363, User Manual

Page: 20 / 95

Section 3: Utility Program Operation
16 AXIS AFP IOP User’s Manual
Setup for PC Configuration
To configure or upgrade the AXIS AFP IOP using the AFP utility
program, the PC must be connected to the printer. Follow these steps:
Important 1. Switch off both the PC and the printer!
2. Connect the serial link cable which is supplied in the delivery. Attach
the connector marked PC to the PC, and the connector marked IOP
to the AXIS AFP IOP in the printer.
3. Switch on the printer and the PC.
Handling Config Files
To make changes to a config file you must either load a premade config
file from your PC or upload a configuration file from the AFP IOP
interface. Alternatively you can enter settings according to the IOP status
page taken from the frontpanel of the Lexmark printer. All configuration
files have the extension *.CFN.
Note: If no config file has been loaded prior to selecting this item, a default
config file setting is used.
Press <ALT> C, or use the mouse to select [Config file].
Open Config File (read from PC harddisk/floppy drive)
When the screen Open Config File appears press <TAB> and use the
arrow keys to move the cursor bar to the appropriate CFN file. Now press
<TAB> again and the [OPEN] field will highlight. Press <ENTER>. You
will now be in the main menu again. The config file is now read into the
memory.