iii
Before getting started, please read the following important safety precautions.
1.
The AIE100-T2NX does not come with an operating system which must be loaded first
before installation of any software into the computer.
2.
Be sure to ground yourself to prevent static charge when installing any internal
components. Use a wrist grounding strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
3.
Disconnect the power cord from the AIE100-T2NX prior to making any installation. Be sure
both the system and all external devices are turned OFF. Sudden surge of power could
ruin sensitive components. Make sure the AIE100-T2NX is properly grounded.
4.
Make sure the voltage of the power source is correct before connecting it to any power
outlet.
5.
Turn Off system power before cleaning. Clean the system using a cloth only. Do not spray
any liquid cleaner directly onto the screen.
6.
Do not leave equipment in an uncontrolled environment where the storage temperature is
below -40
℃
or above 80
℃
as it may damage the equipment.
7.
Do not open the system’s back cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
⚫
Before handling a board or integrated circuit, touch an unpainted portion of the system
unit chassis for a few seconds. This will help discharge any static electricity on human
body.
⚫
When handling boards and components, wear a wrist grounding strap available from
most electronic component stores.
8.
Note!! Caution with touch! AIE100-T2NX will be hot when it's on.
