AIE100-T2NX Series U
ser’s Manual
Jetpack BSP Flash Method
39
4.3
JTOP
— Third-party Jetson Platform Monitor Tool
JTOP is a third-party system monitoring utility that runs on the terminal and see and
control realtime the status of the AIE Series Platform. CPU, RAM, GPU status, power
mode management, toolkits version and more.
Installation Guide:
Please connect to the internet and enter the following commands in the terminal to
install JTOP.
$ sudo apt install python-pip python3-pip
$ sudo -H pip install -U jetson-stats
Once installation is completed, reboot the device and then type the below command
in the terminal to launch JTOP:
$ sudo jtop
Note: JTOP
may require approximately 200 to 300 MB of storage space.
