Page 6 of 28
Axicon Auto ID Limited | inline verifier user guide | Dec 2018
Installation
Axicon 6525-S, 7025-S
You will use two different programs from Axicon for inline barcode verification. The
Axicon Linear Verifier software is used to calibrate the verifier, and the Axicon Inline
Verifier software is used for the verification process.
Software installation.
Insert the CD into the CD drive. The Install Program should run automatically (if
not, open the CD using Windows Explorer and double-click the Autorun Program).
Click
Install Axicon Verifier
and follow the installation instructions after agreeing
to the licence terms and conditions.
At the
Custom setup
window, the boxes relating to
Drivers
and
Main Program
are
automatically selected. It also provides for optional extra plugins (see page 7).
After installation is completed you will find the
Axicon Verifier
directory in
Start
Menu/Programs
and a shortcut to the program on your desktop.
If you have downloaded the software from our website then simply click on the
setup file and follow the instructions.
Hardware installation
Plug the verifier into any available USB port on the computer. For Windows
7, Windows 8 and Windows 10 installations the drivers should be installed
automatically.
Note:
Please follow these installation instructions in the correct order, namely
installing the software before the verifier is plugged into any USB port. If the
verifier is plugged in before the software has been installed, Windows will attempt
to find the correct drivers for the verifier via the internet, and choose an incorrect
option. This then causes problems as the software is unable to install the correct
driver.
The Axicon Inline Verifier software has been installed automatically and you will
find it in the Windows start menu.