Page 11 of 28
Axicon Auto ID Limited | inline verifier user guide | Dec 2018
The verifier should be positioned flat within the cradle and held firmly by the metal
spring mechanism.
Pause Interface
The inline verifier application can be used to stop some printers if an error is
observed or if barcode print quality drops below an acceptable standard.
The following printers are examples of those which can be paused in this way:
• TEC
• CAB Squix
• Sato
•
Datamax “H Class” (Optional GPIO port needs to be fitted)
• Zebra 105 and XIII, XiIII, and Xi4 series – These requires an applicator port
option to be fitted to the printer.
Rewinder
For the verifier to work correctly the barcodes should pass under the verifier under
tension and at a relatively constant speed.
If an internal rewinder is being used, then the labels should pass from the printer,
over both of the rollers in the verifier cradle, round the rear roller and back to the
printer. The rewinder will maintain the correct speed.
If an external rewinder is being used, it should be clutch-driven as this can maintain
tension with a constant speed.
Axicon 6525-S, 7025-S