Page 19 of 28
Axicon Auto ID Limited | inline verifier user guide | Dec 2018
There are four pairs of holes in the base plate. The two inner pairs of holes are
used with the Axicon 6525-S verifier. The two outer pairs of holes are used with the
7025-S.
The two vertical supports will
be fitted to the base plate using
the four small screws. The screws
will need to be fitted from the
underside of the baseplate.
The vertical support should be
positioned on top of the base
plate. It is important that the slot
in the vertical support is nearer the
short end of the base plate.
The cradle assembly position
should be in between the vertical
supports. Make sure that the roller
is facing the longer end of the base
plate.
Secure the cradle to the vertical
supports using the two knurled
screws.
Axicon 6525-S, 7025-S