THE PC CONTROL SOFTWARE (FM and ST versions)
ENG
Page 71
22.3 MONO-DIRECTIONAL MODE (REMOTE)
SERIAL 2
UNIDIRECTIONAL CONNECTION
(SATELLITE, RADIO LINK, STL, ISDN, ETC)
PC CONTROL SOFTWARE
given Target & Group name
The picture shows the mono directional connection mode, which does not involve any return channel. It is
possible to send commands to the equipment from remote sites, but does not allow either remote monitoring
of the machine, nor confirmation of control reception.
The typical application is centralized control – via satellite – of equipment installed at different transmitting
sites.
To enable MONODIRECTIONAL processor control, You need to assign a specific name to every
piece of equipment (Target name) and to assemble them into groups (Group name, i.e.
corresponding to a region), so as to enable selective programming.
Summary of Contents for Falcon 35
Page 2: ......
