BROWSING THE MENU TREE
ENG
Page 42
18 BROWSING THE MENU TREE
This chapter describes all of the parameters and functions you can access and edit through the front panel of
the audio processor, grouped according to functional area. See the Menu Tree on the following page. It is
useful to note that you can also access all menu settings and parameters more quickly and conveniently
through the PC control software.
PRESETS (PROCESSING CURVES)
The main menu displays the 30 factory preset and 10 editable curves.
To select any curve (preset), turn the shuttle knob until it is displayed on the screen, and press Enter.
Alternative curves to the current one are blinking.
FIRMWARE VERSION
Indicates the current firmware version. To upgrade the firmware, see the final chapters of this manual.
DISPLAY REFERENCES
The Display References menu displays the name and operating range, in sequence, of each meter that
appears in the main screen (see paragraph 14.3).
The display returns to the main screen after displaying each meter. Press the ESC or ENTER key to stop it
before it has finished.
Each time the processor is switched on, the Display References sequence is automatically started..
OPTIONAL CONTROLS
Select Optional Control from the main menu to access a menu that allows you to display and/or edit the
following: serial port status, Stereo Enhancer parameters, Coder MPX pilot values, digital input status, the
level of the internally generated RDS signal, the firmware serial number (code), and the internal temperature.
INPUT CALIBRATION
The Input Calibration menu contains all parameters related to processor audio input.
OUTPUT CALIBRATION
The Output Calibration menu contains all parameters related to processor audio output.
The output parameters that may be modified include: Output Level, Pre-Emphasis, Noise Gate and Output
Mode.
EDIT PRESET
The Edit Preset menu allows you to edit any of the preset curves as desired, or to draw a new processing
profile from scratch.
Summary of Contents for Falcon 35
Page 2: ......
