AUDIO I/O AND SERIAL PORT WIRING
ENG
Page 34
15.3 DIGITAL AUDIO OUTPUT **
The digital output features two connectors: coaxial and optic. Only one connector may be connected at a
time to avoid malfunctions. The output format is AES3/EBU with sample rate 48KHz, 24 bit.
Please keep the tos-link connector covered while not used.
The coaxial input (on XLR) is transformer balanced, and so highly immune from external disturbances and
noise (EMI).
Digital Output
1 3 2
Pin 1
Gnd
Pin 2
Signal
Pin 3
Return.
When fitted, the Digital Audio output is always active. The output level is not adjustable..
** Available as an option on ST version only
15.4 ANALOG AUDIO OUTPUT
The processor features XLR analog outputs electronically balanced by high-quality buffers, capable of
withstanding even low-impedance loads (600Ohm), with levels of up to +20 dBu.
Output
L
R
1 3 2
1 3 2
Pin 1
Gnd
Pin 2
Signal
Pin 3
Return.
In case of unbalanced connections, connect the cold pole (Pin 3) to the ground (Pin 1).
-
For output level adjusting, please refer to chapter 19.9
-
To change or disable the pre-emphasis setting, please refer to chapter 19.8
-
To generate a reference tone (400 Hz / 0 dB, which indicates the maximum frequency deviation of
75KHz), please refer to chapter 19.9.
Summary of Contents for Falcon 35
Page 2: ......
