Axel Falcon 35, Operating Manual

Page: 98 / 99

TECHNICAL SPECIFICATIONS - ST version
ENG
Page 98
26 TECHNICAL SPECIFICATIONS - ST version
GENERAL FEATURES
Weight around 4.5 Kg AC Rate 230 Vac / 110 Vac - 50 / 60 Hz
Dimensions 1 rack unit, 352 x 483 x 44 mm Power consumpt. 40 Watt
ANALOG STEREO AUDIO INPUT DIGITAL AUDIO INPUT
(optional)
Conversion 48 KHz, 24 bit Connector Type XLR el. bal. + optical Tos link
Connector Type XLR female el. balanced Formats AES3/EBU, SPDIF (IEC-60958 TYPE II)
Max Input Level + 22 dBu Sampling Rates 32 KHz / 44.1 KHz / 48 KHz / 96 KHz
Nominal Inp Level 0 dBu +/- 6dBu Resolution 24 bit
Inp. Level Range - 20 dB to 20 dB Configuration automatic selection and jitter correction
Impedance 600Ohm / 10KOhm EMI –suppressed Input Sensitivity 200 mVpp
Dyn. Range 98 dB RMS (102 dB A weight) AGC Range 0 to – 20dBFs
Gain Offset +/- 6 dB
ANALOG STEREO AUDIO OUTPUT
Conversion 24 bit Power Limiting According to ITU-R 412
Connector Type XLR male el. balanced D/A conversion
Crystal Semiconductor CS4224 48KHz /
24 bit Sigma Delta
Configuration Flat or 50 / 75uS Preemphasized.
DIGITAL AUDIO OUTPUT
(optional)
Level Range 0 dBu to 15 dBu (0.5 dB step) Connector Type XLR male el. bal. + optical Tos link
Load Impedance 600Ohm Formats AES3/EBU, SPDIF
Source Imped. 50Ohm EMI – suppressed
Dyn. Range 98 dB RMS (104 dB A weight)
Sampling Rate 48 KHz
Distortion 0.005% THD, de-emphasized Word lenght 24 bit
S/N > 90 dB, de-emphasized Impedance 110 Ohm
Crosstalk > 70 dB Level
0 dBFs corresponding to 100%
modulation (not adjustable)
Channel separ. > 70 dB (30 Hz - 15 KHz)
Tone generation 400 Hz, Ref 100% Modulation
STEREO ENHANCER MODULE AGC OPERATION
Effect Depth 0 mSec to 30 mSec AGC Speed 0 to 6 dB/sec (adjustable - 0.2 dB step)
Effect Band 3KHz / 5KHz / 8KHz to 15KHz AGC Range -20 dB to 20 dB
Effect Level: -29dBu to -6dBu AGC Hold time Selectable, from 0 to 3 sec
REMOTE CONTROL
AGC Max Gain Selectable 8, 10, 12, 15 or 20 dB
Serial Ports 2 RS232 SubD 9P optically decoupled
Satellite Port 4800 baud
PC Host Port 19200 baud
BY-PASS MODE
Analogic Input, AGC Off, Gain Offset 0dB, Out Level 0dBu
INPUT FILTER CHARACTERISTICS
Frequency Resp. 30 Hz-15 KHz (+/- 0.1 dB) High Pass 30 Hz (IIR-4th Order)
Output Noise -90 dB (A-weighted) Low Pass
15 KHz (FIR-84 Taps, 15 KHz / -0.1dB,
17 KHz / -70dB)
THD 0.005 %
OUTPUT FILTER CHARACTERISTICS
In/Out delay < 1.5 mSec
PassBand Ripple + / - 0.01 dB
Low Pass
15 KHz (FIR-90 Taps, 15 KHz / -0.1dB,
17 KHz / -80dB)
THD + Noise -91 dB
PROCESS
Preset curves 30 Mid1 Band Atk: 100ms, Rel: 200ms
User edit. curves 10 Mid2 Band Atk: 40ms, Rel: 150ms
AGC bands 1 Mid3 Band Atk: 30ms, Rel: 120ms
Bands 5 (Bass, Mid1, Mid2, Mid3, High) High Band Atk: 20ms, Rel: 100ms
Bass Band Atk: 300ms, Rel: 600ms