Page | 4
REQUIRED ITEMS FOR INSTALLATION:
Drill
Full wood/metal and masonry bit set (3/8 shank-1/2 bit for masonry applications)
2-3 16’ extension ladders
Stud Finder
Full ratchet and socket set
Screwdriver set
String level
Tape Measure
Chalk line
An assistant (two, if awning is more than 12’ long)
SEE THE FOLLOWING APPLICATIONS FOR SPECIFIC SIZE OF TOOLS AND HARDWARE
REQUIREMENTS
NOTE:
There are many different building surfaces to mount your Beauty-Mark Retractable Awning. AWNTECH provides the most
common of WALL MOUNTING BRACKETS in its standard packing. There are so many building surfaces; Awntech does not provide
mounting bolts and hardware. Read carefully to determine whether you need another type of bracket and read the follow sheet to
determine the types and sizes of screws, bolts, anchors, lumber and tubing you may need to purchase for your specific needs.
TYPES OF MOUNTING BRACKETS
Wall Mounting Brackets:
These are the most commonly used brackets. They are included with all awnings. This bracket is
designed for any flat exterior wall mounting surface with a horizontal band at least 10” tall, at least 8’-0” from the eave to the
surface of the patio. It can also be mounted on a fascia (with Guttering removed) Higher than 7’-0” and lower than 9’-6” from the
patio to the bottom of the fascia.
Wall Bracket
Measurements:
Roof Bracket Measurements:
Height
5.5
Height
9
Width
2.25
Width
3
Depth
3
Depth
9
Between the Holes
3.75
Between the Holes
(top)
2 3/8” 2 3/8”-1 1/4”
(Front to Back
Roof Mounting Brackets (optional):
This bracket is designed for any application where the wall mounting and eve mounting
brackets conditions are either not met or acceptable and a roof mounting application is desired. It is not designed for composition
roofs on wafer board or plywood decking. (At this time, we have no solution for clay tile, slate, or cedar shake applications over
lath.) NOTE: WE HIGHLY RECOMMEND THE PURCHASE OF A MOTOR FOR THIS APPLICATION. Awntech highly recommends that a
professional roofing contractor to do the installation. It may be purchased by calling Awntech at 800-203-7049 or sending an email
to
Wall Bracket
Roof Bracket (optional)
