TANKO®-CP Jet Cleaner
7 Maintenance Translation of the original operating/installation instructions 2016/10
61/77
Environmental damage, in case of improper disposal!
Cleaning agents, consumables and lubricants must NOT be allowed to enter the
groundwater, waterways or sewerage system.
There is a risk of environmental damage.
Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths)
which have been used for cleaning in accordance with the local regulations and in
accordance with the information in the manufacturer’s safety data sheets.
Dispose of packaging materials in an environmentally friendly manner and turn them
in for recycling.
7.5
Spare Parts and Customer Service
Spare Parts and Wear Parts
The individual parts identified with a cross in
Table 7.5-1: TANKO-CP2 parts list
Table 7.5-13: TANKO-CP3 parts list
are included in the wearing parts kit, article
number 66901000V0000. It can be purchased from AWH.
Subject to technical modifications in the interest of further development and improvement to
the properties of the device. The Article No., dimensions or materials may differ from those of
the supplied device.
The following data is important when requesting spare parts and for all inquiries:
Device
–
Type
–
Serial number
Spare part
–
Designation
–
Article No.
Customer Service
For technical questions or spare part requests, you can contact the Customer Service
department as follows:
Armaturenwerk Hötensleben GmbH
Schulstraße 5 – 6
39393 Hötensleben, Germany
Tel: +49 39405 92-0
E-mail
Internet
Summary of Contents for TANKO CP Series
Page 84: ......