AWH TANKO CP Series, Operating & Installation Instructions Manual, Page: 51 / 86

TANKO®-CP Jet Cleaner
7 Maintenance Translation of the original operating/installation instructions 2016/10
43/77
WARNING
Risk of chemical burns and burns when opening the container!
The supply line is pressurized. The person may be struck by cleaning jets or come into
contact with residual fluid from the supply line and device. There may also be hot vapors
in the container.
There is a risk of death or severe physical injuries.
 DO NOT open the container during the cleaning process.
 Before starting work, observe the working steps of the switch-off procedure (see
section 7.2 Switch-off Procedure ).
 Before opening the container, observe the cooling and draining time.

Use personal protective equipment (e.g. protective gloves, safety shoes, safety
goggles).
WARNING
Risk of burns from hot surfaces!
The device may heat up significantly as a result of the cleaning fluid or the heat transfer
from the container. Contact with the device can cause burns on the skin.
There is a risk of death or severe physical injuries.
There is a risk of burns from cleaning agent at temperatures of more than +60 °C /
+140 °F.
 Do not remove the devices unless they are in a cool state.
 Allow the device to cool down before starting work.
 Beware of hot surfaces (e.g. warning signs).

Use safety clothing and equipment (e.g. protective gloves, cloths) to provide protection
against the hot surface.
WARNING
Risk of crushing when carrying out maintenance, cleaning and repair work!
The container and the interfaces of the device (e.g. media connections) may be
pressurized!
There is a risk of death or severe physical injuries.
 Before starting work, depressurize the container and all lines.
 Switch off moving parts in the container and secure against being inadvertently
switched back on or set in motion.
 Do not remove the device unless it has been depressurized.
 Wear protective gloves.