AWH TANKO CP Series, Operating & Installation Instructions Manual, Page: 18 / 86

TANKO®-CP Jet Cleaner
10/77
Translation of the original operating/installation instructions 2016/10 2 Safety
–
The operating company must provide personnel with personal safety clothing and equipment and
make sure that this is used (see
section 2.4.1 Personal Protective Equipment ).
–
The operating company must make sure that the danger area of the higher-level plant in which the
device is installed is not accessible to unauthorized persons.
–
The operating company must make sure that no one is permitted to work on the device whose ability
to react is impaired by drugs, alcohol, medication or similar.
–
The operating company must take appropriate measures to inform groups of persons who are not
intended to come into direct contact with the device (e.g. visitor groups) about the potential dangers
involved.
–
The operating company is responsible for making sure that the device is only ever operated in
perfect condition.
–
Wherever high pneumatic pressures occur, there is a possibility of sudden failure of or damage to
the lines and connections. This poses a hazard. The owner/operating company must instruct
operating and maintenance personnel at least once a year on the possible hazards.
–
The constructor of the overall plant must install the switching and safety devices required for setting
up, inspection, shutting down (including emergency shutdown), operation, maintenance, cleaning
and repair.
–
The operating company must design the disconnection of the energy sources on the higher-level
plant technically in such a way that the
7.2 described in section Switch-off Procedure can be
adhered to.
–
The operating company must define and adhere to the intervals for inspections and control
measures in accordance with the environment and media used.
–
The operating company must provide fire safety devices, e.g. the appropriate quantity of suitable
hand-held fire extinguishers of the appropriate size, in easily accessible places and provide
employees with training on fire safety.
–
Warnings in the documentation for externally supplied assembly units must be adhered to and
incorporated into the risk assessments for the specific workplace.
Connections:
Before operating the machine with the device, the operating company must make sure that the local
regulations are observed for assembly and installation and commissioning, if these tasks are performed
by the operating company.