background image

Copyright Information

 

Copyright 1988-2013 AVTECH Software Inc. 

All Rights Reserved. No part of this book may be used or reproduced for commercial benefit in any form or by any means, or 

stored in a database or retrieval system, without prior written permission of AVTECH Software Inc., except in the case of brief 

quotations embodied in articles and reviews. Making copies of any part of this book for any purpose other than your individual 

use is a violation of United States copyright laws and international treaty provisions. For information or additional copies, 

contact AVTECH Software Inc., as directed below. Printed in the United States of America.

Warning and Disclaimer

This publication is shipped as is, without warranty of any kind, either express or implied. While every precaution has been taken 

in the preparation of this publication, the publisher and authors assume no responsibility for errors or omissions. Neither is 

any liability assumed for damages resulting from the use of the information or instructions contained herein. It is further stated 

that the publisher and authors are not responsible for any damage or loss to your data or equipment that may result directly 

or indirectly from your use of this publication and the related hardware & software. Nothing on the AVTECH Resource CD, 

documentation or online shall be construed as conferring any license under any of the AVTECH Software (AVTECH) or any third 

party’s intellectual property rights, whether by estoppel, implication, or otherwise.

Trademark Acknowledgements

AVTECH, the AVTECH Logo, AVTECH Software, the AVTECH System Manager Character, AVTECH.com, AVTECHSoftware.

com, Device Discovery, Device ManageR, Environment Alarm, “Environment Monitoring Made Easy!”, EnvironmentMonitor.

com, “IT Environment Monitoring Made Easy!”, Mini UPS, MUPS, “Network-Wide Monitoring Made Easy!”, “Protect Your 

IT Environment... Don’t Wait Until It’s Too Late!”, Room Alert, Room Alert PLUS, Room Alert Relay, Room Alert RPC, 

Room Alert Signal Tower, Signal Tower, RoomAlert.com, “System Monitoring Made Easy!”, TemPageR, TemPageR.com and 

“Temperature Monitoring Made Easy!”, Wireless Sensor Hub, WiSH, Wireless Sensor Hub & Powered Relay, WiSPR, are 

trademarks or registered trademarks of AVTECH Software Inc. Any other trademarks, product or company names mentioned 

herein are the property of their respective owners and used strictly for the purpose of identifying compatibility. AVTECH 

Software Inc. cannot attest to the accuracy of any other organization’s ownership claim to a trademark and use of any trademark 

in this publication should not be regarded as affecting the validity of any trademark or service mark. 

Special Thanks

We would like to recognize field test participants, our inhouse support staff and the entire software & hardware development 

teams for their contributions and assistance in completing this manual.

Sales, Support & Contact Information

To receive further information or assistance regarding this publication, or any AVTECH product or service, please contact:

 

Headquarters

   AVTECH Software Inc. 

   

Email

 

[email protected]

  16 

Cutler 

Street 

     

[email protected]

 

 

Warren, RI  02885  USA   

 

 

 

[email protected]

 

Phone

  

401.628.1600

 

    

Web 

AVTECH.com

    

 

Sales  

888.220.6700 

     EnvironmentMonitor.com

         RoomAlert.com

Fax  

401.628.1601 

     TemPageR.com

Summary of Contents for TemPageR 3E





























Reviews: