MAIN MENU
39
4) RATE
Select the baud rate for the connected PTZ camera (2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200).
Make sure the baud rate setting of the camera is the same as the setting here, or the DVR will not be able to
control the device.
Note:
To know the default baud rate of the PTZ camera, please refer to its user manual.
6.4.8 DCCS
This function is used for our brand’s HD CCTV camera series. Users could access the setup menu of the camera
itself for further configurations.
ADVANCED CONFIG
CAMERA
CH1
CH2
CH3 CH4
DETECTION DIAGNOSTIC
START
ALERT
MENU
SETUP
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
DEVICE CAMERA
NOTIFY
CONNECTION UNKNOWN
EXIT
1) DIAGNOSTIC
When our brand’s HD CCTV camera is connected, click “START” to ensure the DVR recognizes it. This
function disappears when the DVR recognizes the camera properly.
2) MENU
Click “SETUP” to enter the camera’s configuration page.
6.4.9 IVS
Note:
This function is for selected models only.
Note:
Before using the IVS function, make sure the event record function is enabled on your DVR.
IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY.
When anyone crosses the detection line (virtual fence), the recording will be on.
Note:
Four camera channels are supported for this function.
ADVANCED CONFIG
CAMERA
IVS1
IVS2
IVS3 IVS4
DETECTION CAMERA
CH3
ALERT
IVS MODE
FLOW COUNTING
NETWORK DISPLAY
LINE
OFF
DISPLAY
SENSITIVITY
7
RECORD
RESET
COUNT
SUBMIT
DEVICES
VIRTUAL FENCE AREA
SETUP
DCCS
SCENE
CHANGE
OFF
IVS
SCENE CHANGE LEVEL
MIDDLE
NOTIFY
EXIT
1) CAMERA
Select the camera channel that you want to use the IVS function.