background image

MAIN MENU 

22 

7. MAIN MENU 

Note: 

This menu is available only for “SUPERVISOR”. To know more details, please refer to “6.3 User 
Level Creation” at page 15.

 

7.1 QUICK START 

 

7.1.1 GENERAL 

QUICK START 

 

GENERAL 

 CHANNEL 

TITLE 

ON 

TIME SETUP 

 EVENT 

STATUS 

ON 

SIMULATION 

 DATE 

DISPLAY 

ON 

EaZy 

 MOUSE 

SENSITIVITY 

 

 

 

RECORD CONFIG 

SETUP 

 

 

 

 

 

 

 

 

 

 

 

EXIT 

 

 

1) CHANNEL TITLE 

Select to display the channel title or not (

ON

 / 

OFF

). 

1) EVENT STATUS 

Select to display the event icons or not (

ON

 / 

OFF

).  

Note:  For details about each event icon, please refer to “5.2 Local” at page 11. 

2) DATE DISPLAY 

Select to display the date or not (

ON

 / 

OFF

). 

3) MOUSE SENSITIVITY 

Select the mouse sensitivity by 10 levels. 

4) RECORD CONFIG 

Click “SETUP” to enter the setting page individually for live display, manual record, event record and timer 
record.  

Note: 

The settings shown below depend on the setting tab you selected in this setting page. 

a) 

IMAGE SIZE

: Select the image size for each channel. 

Note: 

The options selectable for 

IMAGE SIZE

 depend on the camera you’re intended to connect, and 

the options for selected 8CH models are up to 1280 x 720.

 

b) 

QUALITY

: Select the video quality for each channel. The higher the value, the better the image quality. 

c) 

I.P.S.

: Image per Second, the higher the value, the more fluent the video. 

Note: 

The options selectable for “I.P.S.” depends on the camera you’re intended to connect.

 

d) 

BITRATE (kbps)

: Select how much data to process per unit of time for each channel. The higher the 

value, the better the video quality. 

e) 

BITRATE CONTROL

: Configure the upper bit rate limit for the selected channel if necessary. 

VBR

 - When the bit rate of the camera exceeds the value you set, the video fluency may be affected; 

CBR

 - When the bit rate of the camera exceeds the value you set, the image quality may be affected. 

f) 

G.O.V.

: “Group of VOPs” is used to configure the length of G.O.V. The greater of the value, the less the 

bandwidth for transmission, and the poorer the image quality. 

Summary of Contents for AVH336













































































Reviews: