REMOTE OPERATION
14
6. FREQUENTLY-USED FUNCTIONS
6.1 Key Lock / Unlock
To lock or unlock local operation, click
(unlock) or
(lock) on the device status bar to change the status
to
(lock) or
(unlock).
To unlock local operation, you’ll be prompted to enter the user name and password to access.
Note:
The default user name and password are both “
admin
”, which is the highest user level
Note:
Different user level has different access privilege for certain functions. For details, please refer to
“6.3 User Level Creation” at page 15.
6.2 IP Device Search
Note:
This function is available only for “SUPERVISOR”. To know more details, please refer to “6.3 User
Level Creation” at page 15.
Click
(IP Search) to start searching IP camera(s) connected in the same network segment as the recorder
(i.e.
10.1.1.xx
by default).
You’ll see the list of every connected IP camera with its connection status to this recorder and MAC address.
IP SEARCH
IP PORT
MAC TYPE
PROTOCOL
STATUS
10.1.1.12
88
00:0e:53:e5:9a:f1
IP CAMERA
AVTECH
CONNECTED TO CH1
10.1.1.12
88
UNKNOWN
IP CAMERA
ONVIF
CONNECTED TO CH1
10.1.1.13
88
00:0e:53:a6:91:18
IP CAMERA
AVTECH
CONNECTED TO CH2
10.1.1.13
88
UNKNOWN
IP CAMERA
ONVIF
CONNECTED TO CH2
10.1.2.14
88
00:0e:53:a5:9f:a2
SWITCH
AVTECH
UNUSED
10.1.2.14
88
00:0e:53:a5:9f:a2
SWITCH
AVTECH
UNUSED
10.1.1.15
88
00:0e:53:e1:4e:k5
IP CAMERA
AVTECH
CONNECTED TO CH3
10.1.1.15
88
UNKNOWN
IP CAMERA
ONVIF
CONNECTED TO CH3
10.1.1.16
88
00:0e:53:s5:3e:h6
IP CAMERA
AVTECH
CONNECTED TO CH4
10.1.1.16
88
UNKNOWN
IP CAMERA
ONVIF
CONNECTED TO CH4
10.1.1.17
88
00:0e:53:e6:4b:26
IP CAMERA
AVTECH
CONNECTED TO CH5
10.1.1.17
88
UNKNOWN
IP CAMERA
ONVIF
CONNECTED TO CH5
CONNECT
SETUP
EXIT
To fix the camera IP address, or allow the recorder to assign an IP address to your IP camera, select
SETUP
,
and select
STATIC IP
or
DHCP
for
NETWORK TYPE
.
Click
APPLY
and
EXIT
to save your changes.
SETUP
NETWORK TYPE
DHCP
IP 10.1.1.14
PORT
80
USER NAME
admin
PASSWORD
*****
NETMASK
255.0.0.0
GATEWAY
10.1.1.10
PRIMARY DNS
168.95.1.1
EXIT
