Avnet MicroZed 7010, Getting Started Manual

Page: 8 / 39

Page 8
MicroZed IIoT Key Features
MicroZed 7010 SoM

Zynq
™-7000 AP SoC XC7Z010-CLG400-1 Processor

Memory
o
1 GB DDR3
o
128 Mb Quad-SPI Flash
o
4 GB microSD card

Communication
o
10/100/1000 Ethernet
o
USB Host 2.0 and USB-UART

Expansion connectors
o
2 Micro-Header connectors (108 single-ended, 48 differential pairs, Agile Mixed
Signaling (AMS))
o
Digilent Pmod
™
Compatible header (8 MIO)

Clocking
o
33.33333 MHz clock source for PS

Configuration and Debug
o
Xilinx Platform Cable JTAG connector

General Purpose I/O
o
1 user LED
o
1 push button
Arduino Carrier Card

Full Arduino-compatible Shield site with connection to MicroZed PL I/O

Two 2x6 Pmod™-compatible peripheral interfaces for MicroZed

Supports interface for PL based SDIO/SPI

Supports interface for I2C/UART

One 2x6 Pmod™-compatible peripheral interface to low-power MCU connector
ST Microelectronics motion MEMS and environmental sensor Shield

Six sensor solutions connect on Shield sockets via I2C AXI soft IP
o
3-axis accelerometer and 3-axis gyroscope
o
3-axis magnetometer
o
Humidity and temperature
o
Pressure

General Purpose I/O

1 user LED
Maxim Integrated thermocouple-to-digital peripheral module

Connects 2x6 peripheral module via SPI AXI soft IP

Dual temperatures from on-board sensor and thermocouple sensor
o
Thermocouple temperature range -270°C to +1800°C