Page 12
Pulsar Login and Firmware Upgrade
Once power has been applied to the kit, the boot sequence will initialize the Programmable
Logic with the supplied hardware system. Completion of this step is indicated by the illumination
of the blue DONE LED on the MicroZed SoM.
Once hardware initialization is complete, the Pulsar Linux software will boot from the microSD
card. On completion of the boot, the serial console on the host will display a login prompt, as
shown here:
1. Log in at the command prompt with user/pw:
root/incendia
2. To upgrade the device firmware, at the command prompt enter the following:
smart update
This procedure is typically done only on the first-time boot, but it can be repeated as
desired to manually check for updated repository contents.
The Smart Package Manager will automatically contact the Wind River public repository to
compare the contents on the microSD card with the current packages available. If necessary,
newer packages will be downloaded and installed automatically.
Summary of Contents for MicroZed 7010
Page 17: ...Page 17 ...
