MSC C10M-BT / MSC C10M-BTC
User Manual
28 / 90
2.12.12 General Purpose I/O
Signal
Pin
Type
Signal
Level
Power
Rail
Remark /
Tolerance
PU/PD/SR
Description
Source /
Target
GPI[0:3]
I
CMOS 3.3V
3.3V
General purpose input pins. Pulled high internally on the module.
These signals are multiplexed with SDIO interface.
BT SOC,
Embedded
Controller
GPO[0:3]
O
CMOS 3.3V
3.3V
General purpose output pins. Upon a hardware reset, these outputs
are low. These signals are multiplexed with SDIO interface.
BT SOC,
Embedded
Controller
2.12.12.1
General Purpose I/O Mapping
MSC C10M-BT
GPIO
Ball Name
Location
GPI[0]
GPIO_S0_SC[034]
AT28
GPI[1]
GPIO_S0_SC[035]
BD26
GPI[2]
GPIO_S0_SC[036]
AU28
GPI[3]
GPIO_S0_SC[037]
BA26
GPO[0]
GPIO_S5[36]
M2
GPO[1]
GPIO_S5[37]
N3
GPO[2]
GPIO_S5[38]
P2
GPO[3]
GPIO_S5[39]
L3
MSC C10M-BTC
GPIO
Ball Name
Location
GPI[0]
GPIO_S0_SC[034]
AT28
GPI[1]
GPIO_S0_SC[035]
BD26
GPI[2]
GPIO_S0_SC[036]
AU28
GPI[3]
GPIO_S0_SC[037]
BA26
GPO[0]
GPIO_S0_SC[055]
BD12
GPO[1]
GPIO_S0_SC[058]
BC14
GPO[2]
GPIO_S0_SC[059]
BF14
GPO[3]
GPIO_S0_SC[060]
BD16
Constraint for Linux:
There is currently no EAPI support for GPIOs on the C10M-BTC module.
Only the C10M-BT module has GPIO support in EAPI for Linux.
