Avnet COM Express MSC C10M-BT User Manual Download Page 14

Page: 14 / 90

MSC C10M-BT / MSC C10M-BTC

User Manual

14 / 90

Functional units

CPUs

(FCBGA 1170

package)

Intel® Atom

E3815, SC, 1.46GHz, 512 KB L2 Cache, 5W, 1ch DDR3L.

Intel® Atom

E3825, DC, 1.33GHz, 1 MB L2 Cache, 6W, 1ch DDR3L.

Intel® Atom

E3826, DC, 1.45GHz, 1 MB L2 Cache, 7W, 2ch DDR3L.

Intel® Atom

E3827, DC, 1.75GHz, 1 MB L2 Cache, 8W, 2ch DDR3L.

Intel® Atom

E3845, QC, 1.91GHz, 2 MB L2 Cache, 10W, 2ch DDR3L.

Intel® Celeron

J1900, QC, 2.00GHz, 2.41GHz Burst, 2 MB L2 Cache, 10W,

2ch DDR3L.
Intel® Celeron

N2930, QC, 1.86GHz, 2.16GHz Burst, 2 MB L2 Cache, 7.5W,

2ch DDR3L.
E3815, E3825, E3826, E3827, E3845: T

JUNCTION

= - 40°C to 110°C,

J1900: T

JUNCTION

max. 105°C, N2930: T

JUNCTION

max. 100°C

Memory

DDR3L on module for up to 8GB non-ECC unbuffered. (optional ECC)
(E3815, E3825 support only 4GB)
PC3-8500 DDR3L SDRAM (DDR3L-1067).
PC3-10600 DDR3L SDRAM (DDR3L-1333).
E3815, E3825, E3826 support only DDR3L-1067.

SATA 2 SATA channels up to 3.0 Gbit/s.

USB 4 x USB 2.0. 1 x USB 3.0. (8 x USB 2.0 optional at MSC C10M-BT)

USB Client 1 x USB 2.0 client (only MSC C10M-BTC)

COM Express™ Type 10 interface, fully compliant to COM Express Base Specification

R2.1.

PCI Express™ Three channels PCIe x1.

LPC Low Pin Count Bus for heritage interfaces.

SPI Serial Peripheral Interface for one SPI flash device.

Graphics Controller Integrated Intel

HD Graphics.

LVDS Single channel 24-bit LVDS

(shared with eDP)

Digital Display Ports

Two Digital Display Interface (DDI) (one is shared with LVDS)

DP up to 2560 x 1600

HDMI up to 1920 x 1080

Single-link DVI up to 1920 x 1080

Ethernet 10/100/1000Base-TX (Intel® Ethernet Controller I210-AT).

Sound Interface

Serial Ports

High Definition Audio Interface.
Support for up to two external codecs.
Integrated DisplayPort/HDMI Audio support.
Two serial ports.

Watchdog Timer Embedded controller creates watchdog alert and system reset.

TPM (option) Optional TPM module, TPM 1.2, SLB9660.

Fan Supply 4-pin header for support of a 12V PWM fan.

Real Time Clock RTC integrated in Intel® Atom SOC.

CMOS Battery External.

System Monitoring Voltages, temperatures, fan



Core voltage



3.3V onboard voltage



12V input voltage



5V SBY input voltage



CPU temperature (0°C - 100°C)



System memory temperature



Board temperature



Fan speed and automatic fan speed control

SSD Optional on module eMMC SSD

Summary of Contents for COM Express MSC C10M-BT



























































































Search results

Summary of Contents for COM Express MSC C10M-BT

Reviews:

Related manuals for COM Express MSC C10M-BT

Brands by name

Popular brands

Avnet COM Express MSC C10M-BT, User Manual

Search results

Summary of Contents for COM Express MSC C10M-BT

Reviews:

Related manuals for COM Express MSC C10M-BT

Brands by name

Popular brands