AvMap G7 Farmnavigator, User Manual

Page: 37 / 80

37
AvMap G7 Farmnavigator – User Manual
3.2.3 Field
In order to define a field, go along the field perimeter and activate field registration mode.
The term field refers to the physical perimeter of the field. “
FIELD” function allows you to save the
position of the field. It is possible to carry on the activities even during the measurement of field
boundaries. It is important to take into account that G7 Farmnavigator calculates the position of the
field boarders according to the width of the chosen implement.
- Move to the edge of the field;
- Select “START” if you are working the area during the registration of the field boundaries;
-Select “ FIELD” and move along the field perimeters;
Figure 3.2.c Creation of a new field
-Tap “ FIELD” again, when you are in close proximity to the starting point so as to finish
recording;