AvMap G7 Farmnavigator User Manual Download | Manualshive

Page: 29 / 80

background image

29

AvMap G7 Farmnavigator – User Manual

5

Start/Stop

Press it to start/stop colouring the
worked area on the map.

6

Setting

Press it to open set up page.

7

Zoom in/zoom out wheel

Use the lateral wheel to zoom in
or out the map.

8

Nudge control

It allows you to move the line to follow, moving
the remote control to the right or to the left.

Table 2.4.i Remote control functions

2.4.8 Wireless connectivity (for G7 Plus only)

G7 Farmnavigator is provided with wireless connectivity and it can be connected to a WiFi hotspot. A

dedicated menu allows the configuration of a WiFi network.

1.  Select “SET UP” > “WiFi”;
2.  Select “ON” to start searching for available networks;
3.  Select the network that you want to access;
4.  Select “Password” to enter the PIN code;
5.

Wait for a moment and confirm the connection. Tap the name of the network to check

6. Select “FORGET” to disable automatic WiFi connection.

Figure 2.4.j WiFi configuration page

2.4.9 Mirror Control (for G7 Plus only)

Install the app Mirror Control to control G7 Farmnavigator with your smartphone or tablet. This app
allows you to use the display of your Android or Apple device as if it was G7 Farmnavigator display.

connection status and IP address information.

«
...
27
28
29
30
31
...
»

Summary of Contents for G7 Farmnavigator

















































































Reviews:

No comments

Related manuals for G7 Farmnavigator

Streetpilot C320

Brand: Garmin Pages: 8

StreetPilot c340

Brand: Garmin Pages: 44

nuvi 800 series

Brand: Garmin Pages: 12

GPSMAP 8400 series

Brand: Garmin Pages: 8

Brand: Garmin Pages: 20

StreetPilot c330

Brand: Garmin Pages: 8

CN-NVD905U - Strada - Navigation System

Brand: Panasonic Pages: 116

Brand: Reliable Pages: 6

Nitrogen Pac SC-W

Brand: UNITED Pages: 112

EcoZone ConServer

Brand: IrriGreen Pages: 29

Brand: Navman Pages: 10

Brand: Grundig Pages: 34

Brand: Farenheit Pages: 6

Brand: Navicom Dynamics Pages: 2

OPTISOUND OPTIFORD6-V8

Brand: Vibe Pages: 4

Brand: Taffio Pages: 10

Brand: Xtrons Pages: 9

Brand: Rosen Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands