Basic operation
OVATION PA 8.3
| 28 |
2.12.1 Battery replacement
CAUTION
The two middle screws
without arrow mark ing
must not be loosened to
change the battery!
As soon as the range of the remote control decrea
-
ses significantly, the batteries must be replaced.
Remove the screws marked on the bottom with six
a r r o w s . N o w t u r n t h e r e m o t e c o n t r o l o v e r a n d
remove the bottom with the PCB. Now remove the
used batteries and replace them with two new ones
of the same type (lithium coin cell 3V, type CR2032).
When inserting, pay attention to the correct polarity
of the batteries (mark "+" upwards), as otherwise
the electronics may be damaged.
Summary of Contents for OVATION PA 8.3
Page 1: ...OVATION PA 8 3 Operating Instructions...
Page 4: ......
