Basic operation
OVATION PA 8.3
| 21 |
The
set RDS display
function allows you to select a
frequency (
FREQUENCY
) or station name (
NAME
).
2.9.2
Set scan mode
Use the
set scan mode
function to set the desired
scan mode:
AUTO
automatically searches for the
next station after pressing one of the two right-hand
menu buttons, whereas
MANUAL
allows manual tun
-
ing (see section "
2.9.3
Set 2 channel mode
For an optimal and noise-free sound quality of the
t u n e r, t h e
2 c h a n n e l m o d e
o p t i o n o f f e r s y o u a
choice between
MONO
and
STEREO
. Depending on
the selected setting, the tuning t hreshold of the
tuner changes during automatic tuning: In the
STE
-
REO
setting, only stations with strong transmission
power are identified - in the
MONO
setting, also sta
-
tions with weaker transmission power.
2.9.4
Set deemphasis
Choosing a correct deemphasis value will improve
the sound quality of the FM tuner by optimizing the
signal-to-noise ratio and transmitting the entire fre
-
quency range as consistently as possible. If you do
not operate your device in the USA, please select the
option
EUR, AUS, JPN
with a time constant of
50
(μs). In the USA, however, a time constant of
75
(μs)
is recommended.
Summary of Contents for OVATION PA 8.3
Page 1: ...OVATION PA 8 3 Operating Instructions...
Page 4: ......
