Getting started
OVATION PA 8.3
| 7 |
with a trigger input of your amplifier. For a correct
p i n a s s i g n m e n t , p l e a s e r e f er s ec t i on , s e e s e c
Pin assignment: Trigger outputs
1.2.9.2
Remote activation of latest generation AVM
amplifiers
If you have an AVM amplifier of the latest genera
-
tion connected (EVOLUTION MA 3.2, SA 3.2, OVA
-
TI ON M A 6 / 8 . 2, SA 6 / 8 . 2 ), i t wi l l a ut om a t i c a l l y
turned on, provided the respective mode is activated
at your AVM amplifier. A connection of a separate
trigger cable (see section"
amplifiers with analog trigger input
" on page 6) is not
required in this case.
1.2.10 Connection of headphones
HINWEIS
Please note that all out
-
p u t s i g n a l s ( 1 0 ) a r e
m u t e d a s l o n g a s t h e
headphone output (7) is
connected.
Through the headphone output on the front of the
unit (7), headphones with a 6,35 mm jack plug may
be connected. The volume of the headphone output
signal is regulated with the volume control (6).
Summary of Contents for OVATION PA 8.3
Page 1: ...OVATION PA 8 3 Operating Instructions...
Page 4: ......
