AVM OVATION PA 8.3, Operating Instructions Manual

Page: 31 / 44

Basic operation
OVATION PA 8.3 | 27 |
By switching between sources with the source
selector (2), you may compare the set levels and
adjust the sensitivity of all inputs with the volume
control (6) in a range of -9.5 to +10 dB.
NOTE
Please note that the RC
3 remote control is disa
-
b l e d d u r i n g t h e l e v e l
adjustment process.
Once all desired levels have been adjusted, press
the center menu button EXIT LVL . The set sensitivity
values are saved and the device c hanges to t he
general operating state.
Please note that the menu is also available for
adjusting the level of the FM Tuner , but may not be
selected by a long press on the menu button. Ins -
tead, select another existing input in normal opera -
ting mode, then press and hold the MENU button for
two seconds, then use the source selector (2) to
switch to
FM Tuner to adjust the sensitivity value
with the volume control (6). Once the desired level
of the
FM Tuner is set, press the center menu button
EXIT LVL . The set sensitivity value is saved and the
device changes to the general operating state.
2.12 Remote Control
The PA 8.3 comes standard with the RC 3 remote
control. The following functions can be controlled
with the RC 3 remote control: Turning the device on
and off (
ON, OFF) , volume adjustment (< VOLUME >),
source selection (< INPUT >).