Basic operation
OVATION PA 8.3
| 24 |
2.11.2 Sound settings of the TONE IN card
NOTE
The menu options exp
-
l a i n e d b e l o w a r e o n l y
avail ab le i f a
TON E I N
input card with integra
-
ted tone control module
is installed (see section
"
A s s e m b l y o f i n p u t a n d
).
2.11.2.1 Set tone control
With the menu item
set tone control
you may acti
-
vate the sound control electronics which allow the
adjustment of bass and treble as well as the selec
-
tion of different loudness curves. In the
BYPASS
position, the tone control electronics are deactiva
-
ted (previously made settings are still stored).
In the
ACTIVE
position, the tone control electro
-
nics are ready to operate and will be activated as
soon as you make a setting under
set bass
,
set tre
-
ble
or
set loudness
. If a neutral setting (
BASS = 0
,
TREBLE = 0,
COUNTOUR = OFF
) has been selected,
the tone control electronics will remain deactivated
even in the
ACTIVE
position until one of the parame
-
ters is changed.
In the general operating state, an activated tone
control electronics is displayed in the upper area of
the display with
TONE
ON
- otherwise
LINEAR
.
Bass and treble can be raised or lowered together
for all inputs (
GLOBAL
) or specifically for the cur
-
rently selected input (
INDIVIDUAL
). If an individual
setting is required, the inputs must first be parame
-
terized via the
Personal Setup
" on page 29). This is useful, for example, to
compensate for a bass weakness of the turntable,
without the bass is raised at another input source.
Summary of Contents for OVATION PA 8.3
Page 1: ...OVATION PA 8 3 Operating Instructions...
Page 4: ......
