AVM OVATION PA 8.3, Operating Instructions Manual

Page: 30 / 44

Basic operation
OVATION PA 8.3 | 26 |
Select a sound source and set a moderate lis -
tening volume. Then switch to the menu set loud -
n e s s . U n d e r C O N T O U R , u s e t h e m e n u b u t t o n s
< VALUE > to select one of the 9 available loudness
correction curves until the sound appears balanced
and pleasant. As soon as you exit the menu (menu
button
EXIT ), the selected setting remains stored.
Any change in the volume setting will now cause an
adjustment of the bass and treble levels.
Please note: When the set loudness menu is cal -
led up again, the displayed value may differ from the
originally selected setting. This is not a mistake, but
due to the fact that the sound engine unit selects an
adapted correction curve depending on the currently
set volume level. The current curve is then displayed
accordingly when the
set loudness menu is selec -
ted.
2.11.3 Input sensitivity (Level Adjustment)
CAUTION
T h e m e n u f o r l e v e l
a d j u s t m e n t o f d i g i t a l
inputs is only available
if a comp atib le dig ital
s i g n a l i s p r e s e n t a t a
respective input.
Often, the sound sources of a hifi system have diffe -
rent volume levels. Switching the available inputs
may result in an unpleasant volume jump that can
be prevented by adjusting the input sensitivity of the
available input sources.
Use the source selector (2) to select an existing
input and set the monitoring volume to a comforta -
ble level with the volume control (6). By switching to
antother input, check if the levels are approximately
identical. If you notice a major deviation, press and
hold the
MENU button for two seconds. On the right
side of the display below level , the current sensiti -
vity value of the selected input is displayed.