AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download

Page: 91 / 122

IP Address

FRITZ!Box Fon WLAN 7113

3.4

IP Address

Upon delivery the FRITZ!Box is assigned the following IP
address:

192.168.178.1

If you would like to change the IP address, please read
through the following sections. Also note the additional
information in the section “Reserved IP Addresses” on
page 91.

When Does It Make Sense to Change the IP Address?

You should change the IP address of the FRITZ!Box if the
following apply to your network:

You have an existing local IP network, one subnet wi-
th several computers.

Fixed IP addresses are registered in the network set-
tings of the computer, and you do not want to or are
not permitted to change these addresses.

You want to connect the FRITZ!Box to the subnet in
order to make the FRITZ!Box features available to all
of the computers in the subnet.

Reserved IP Addresses

The entire IP network 192.168.180.0 in the FRITZ!Box is
reserved for internal purposes.

IP addresses from this network may

not

be assigned to the

FRITZ!Box.

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands