AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download

Page: 14 / 122

FRITZ!Box Fon WLAN 7113

Connecting to the computer

Connecting

Set aside the power supply unit out of the FRITZ!Box
package.

Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.

Plug the other end into an AC power outlet.

The green “Power/DSL” LED will light up after a few sec-
onds to indicate that the device is ready for operation.

3.3

Connecting to the computer

If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect
a computer with the FRITZ!Box.

A computer can be connected with the FRITZ!Box in two
different ways:

via a LAN port

wirelessly via WLAN

Properties

Note the following when connecting computers to the
FRITZ!Box:

One

computer can be connected to the FRITZ!Box by

only

one

of these means.

At each of the network ports of the FRITZ!Box, a com-
puter can be connected directly or via a hub/switch.

Using WLAN you can connect multiple computers wi-
th the FRITZ!Box at the same time.

The way a computer is connected to the FRITZ!Box is
the same regardless of the operating system on the
computer.

All of the computers connected with the FRITZ!Box
constitute a network.

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands