AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download Page 21

Page: 21 / 122

Connecting with the Analog Telephone Line

FRITZ!Box Fon WLAN 7113

Connect the longer of the two gray ends of the cable
to the port labeled “DSL/TEL”.

Then connect the shorter, gray end of the cable to the
socket on the DSL splitter labeled “DSL”.

The green “Power” LED stops flashing after a short time
and remains lit to signalize that FRITZ!Box is ready for In-
ternet connections over DSL.

3.7

Connecting with the Analog Telephone Line

Your telephone line is either an analog line or an ISDN
line.

If you have an analog telephone line, read here about how
to connect the FRITZ!Box with the analog telephone line.

Connecting to the analog telephone line via the DSL splitter

The black branch of the Y-shaped cable is for connec-
tion to the telephone line (see the sectionspage 21).

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands