AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download

Page: 30 / 122

FRITZ!Box Fon WLAN 7113

Telephony Functions

6.3

Telephony Functions

Call List

The Call List displays outgoing calls and sent faxes, in-
coming calls and faxes, as well as incoming calls in ab-
sence.

If the number of a caller or someone called is entered in
the Telephone Book, the Call List will display the name
from the Telephone Book.

The Call List can be saved as a file.

The Call List is found in the “Settings / Advanced Set-
tings” area, in the “Telephony / Calls” section.

Telephone Book

A Telephone Book is at your disposal in the FRITZ!Box.

The “Telephone Book” is found in the “Settings / Advan-
ced Settings” area, in the “Telephony” menu.

Block Calls

The telephone number block of the FRITZ!Box offers you
the following options:

Numbers and number ranges can be blocked for out-
going calls

From the FRITZ!Box no outgoing calls to a blocked
number range are possible. In this manner you can
block connections to certain mobile networks, for in-
stance.

blocking telephone numbers for incoming calls

For incoming calls you can block certain numbers to
avoid receiving calls from unwanted callers.

More functions and settings options for telephony are
available in the “Settings / Advanced Settings” area, in
the “Telephony” menu.

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands