AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download Page 31

Page: 31 / 122

Alarm

FRITZ!Box Fon WLAN 7113

The command for blocking calls is located in the “Settings
/ Advanced Settings” area, in the “Telephony / Calls”
menu.

Alarm

With the alarm function you can use the telephones con-
nected to the FRITZ!Box as alarm clocks.

You can specify several different times for the alarm
to go off.

An individual telephone can be selected for the alarm
function.

The “Alarm” function is located in the “Settings / Advan-
ced Settings” area, in the “Telephony” menu.

Dialing Rules

Dialing rules specify when calls are conducted on the
fixed-line network, and when they take place over the In-
ternet.

All connections to number ranges for which a dialing rule
has been defined are established using the specified con-
nection type.

The “Dialing Rules” menu is located in the “Settings / Ad-
vanced Settings / Telephony” area.

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands