Latest products and information available at www.avlite.com
18
AV-70-RF Solar Aviation Light
with Radio Control
Runway B Only is to be HIGH Intensity, with a Timeout of 8 Minutes and Runway A will
be I/R Low Intensity
•
On Runway A, set the rotary switches to A=0 B=0 inside the light head.
• On Runway B, set the rotary switches to A=1 B=0 inside the light head.
Rotary Switch A can be set to
any value that is different from Runway A.
• Turn the Control unit On
• Use the arrow keys to adjust the operational Mode to
On
• Press
MENU
button once to reach
Light Group
• Set the Light Group to 1
• Press
MENU
button once to reach
LED Intensity
• Use the arrow keys to adjust the LED Intensity to
HIGH
• Press
MENU
button once to reach
Timeout Mode
• Use the arrow keys to adjust the Timeout Mode to Enabled
LOW
• Press
MENU
button once to reach
Timeout Duration
• Use the arrow keys to adjust the Timeout Duration to
8 Minutes
• Press
MENU
button once to reach
LED Bank Setup
• Use the arrow keys to adjust the LED Bank to
Visible
• Press
SEND
button
- Runway A will not change state.
- Runway B will now be High Intensity. After 8 minute Runway will revert back to LOW intensity.
• Press
MENU
button until you reach
Light Group
• Set the Light Group to 0
• Press
MENU
button once to reach
LED Intensity
• Use the arrow keys to adjust the LED Intensity to
LOW
• Press
MENU
button until you reach
LED Bank Setup
• Use the arrow keys to adjust the LED Bank to
IR
• Press
SEND
button
- Runway A will be in LOW Intensity IR mode
- Runway B will not change state. Lights on Runway B will still receive and pass on the message
intended for Runway A.
