Latest products and information available at www.avlite.com
10
AV-70-RF Solar Aviation Light
with Radio Control
Check the mounting
plate with a spirit
level in all directions
Installing the Light Assembly to the Frangible Concrete Mount
a. Mount the base plate to the concrete using 4 x M8 concrete bolts.
b. Fit the frangible mounting plate onto the concrete base plate and secure using the M8 x 16 SHCS
c. During Installation every effort should be made to ensure that the light is level when installation is
complete.
The following guide lines will help to ensure that the lights will be installed correctly.
- When installing a concrete mount plate ensure that the concrete pad is level using a spirit level.
- Fit the frangible coupling and top mounting plate and using a spirit level check that the light
mounting plate is level using a spirit level.
d. Fit the AV-70-RF to the light mounting plate using M8 SHCS, large flat washers and Nylock nuts.
Note:
After adjustments, ensure all nuts and bolts are tightened securely and all tools, spares and
packaging are removed from the runway.
Item
Description
Qty
1
AV-70-RF Solar Airfiled
Light
1
2
Mount Plate
2
3
Frangible Sleeve
1
4
Bolt, 8mm x 25
4
5
Penny Washer, 8mm
4
6
Nylock Nut, 8mm
4
7
Socket Head Cap Screw,
8mm x 16
2
8
Allen Key, 6mm
1
Figure 4 Frangible Concrete Mount
Installation
1. Before activating the lights, the lights must be layed out on the runway in the
location they will be installed.
2. RF lights should always be installed on mounting plates and stakes. Avlite does
not recommend installation on rubber tiles.
