Latest products and information available at www.avlite.com
17
AV-70-RF Solar Aviation Light
with Radio Control
9.
Using the Radio Control to Activate the
Airfield Lighting System (ALS)
The Radio Controller is very easy to use and by reading through the How To section below, all of the
advanced features will be well within your grasp.
Make sure that all the lights in the same Light Group have had the rotary switches set correctly, see
“Assembling the Light” section for details.
Turn All the Lights ON
• Turn the Radio Controller On
• Use the arrow keys to adjust the operational Mode to
ALWAYS
ON
• Press
MENU
button once to reach
Light Group
• Set the Light Group to ALL
• Press
SEND
button
• Every radio light within range of the control unit will now turn on.
Setup the Lights to Operate in DUSK till DAWN mode
• Turn the Control unit On
• Use the arrow keys to adjust the operational Mode to
DUSK till DAWN
• Press
MENU
button once to reach
Light Group
• Set the Light Group to ALL
• Press
SEND
button
• Every radio light within range of the control unit will now turn on at night, during the day the lights will
turn off automatically.
Runway B Only is to be HIGH Intensity, but Runway A will Remain in Current
Configuration
• On Runway A, set the rotary switches to A=0 B=0 inside the light head.
• On Runway B, set the rotary switches to A=1 B=0 inside the light head.
Rotary Switch A can be set to
any value that is different from Runway A.
• Turn the Control unit On
• Use the arrow keys to adjust the operational Mode to
ALWAYS
ON
• Press
MENU
button once to reach
Light Group
• Set the Light Group to 1
• Press
MENU
button once to reach
LED Intensity
• Use the arrow keys to adjust the LED Intensity to
HIGH
• Press
MENU
button until you reach
LED Bank Setup
• Use the arrow keys to adjust the LED Bank to
Visible
• Press
SEND
button
- Runway A will not change state.
- Runway B will now be High Intensity.
