AVL DITEST HV SAFETY 2000, User Manual

Page: 21 / 58

AVL DiTEST HV Safety 2000 Performing a measurement
User manual 3-1
3
Performing a measurement
1. Start AVL DSS by double-clicking on .
Click on Diagnosti
c│HV Safety
, (see Fig. 3-1).
Fig. 3-1
2. Click on the desired operating mode:
- All pole DC voltage measurement, see section 3.2,
- DC voltage measurement, see section 3.3,
- HV insulation measurement, see section 3.4,
- Equipotential bonding check, see section 3.5,
- Resistance measurement, see section 3.6,
- Diode test, see section 3.7,
- Capacity measurement, see section 3.8,
- Insulation monitor check, see section 3.9,
- SAE J1766 measurement, see section 3.103.5,
- Full measurement, see section 3.113.11
3.
Clicking on in the “
HV Safety
” window closes AVL DiTEST HV Safety 2000.
4.
Clicking on in the “
DSS Manager
” window closes AVL DSS.
Danger of death from electrical voltage
Make sure that no other devices with an earth connection are connected to the test object at any
time during a measurement.
Danger of death from electrical voltage
During measurements in high-voltage environment, the AVL DiTEST HV Safety 2000 may only be
used, if the voltage source is non-grounded!
DANGER
DANGER