AVL Looms Jacq3G, User Manual

Page: 100 / 176

Install the Beater Jacq3G Loom User’s Manual
Page | 92 Two-Box Flyshuttle – Dropbox Movement
Figure 77 - Flyshuttle adjustment screw
Note:
This adjustment is critical. Please make it carefully. It is wise to lay a straight
edge across the shuttle race and drop box when doing this to assist you in
getting the two perfectly aligned.
3) When you have it properly adjusted, secure the lock nuts on the
brass screws. Do these adjustments on both the left and right drop
boxes. If your shuttle flight is erratic, re-check these adjustments.
4) To make sure that the adjustment screws stay in place, you might
want to purchase a small tube of a thread locking agent (such as
Loctite) and apply a drop or two to each of these screws where the
screws go into the cast metal brackets.
Adjust the shift handle cables
1) With the shift handle shifted to its rightmost, adjust the left drop
box turnbuckle so that the box is against its top stop and the spring
at the turnbuckle is slightly extended.