Avitech MCC-8001U, User Manual

Page: 57 / 98

45
NOTE:

The RJ-50-to-GPI terminal block adapter has eight positions that can each be used for
setting tally and loading presets.

By default, the terminal block is used to turn on / off the tally for each window:
– Position 1 + GND = turns on main tally for window 1.
– Position 2 + GND = turns on secondary tally for window 1.
– Position 3 + GND = turns on main tally for window 2.
– Position 4 + GND = turns on secondary tally for window 2.
– Position 5 + GND = turns on main tally for window 3.
– Position 6 + GND = turns on secondary tally for window 3.
– Position 7 + GND = turns on main tally for window 4.
– Position 8 + GND = turns on secondary tally for window 4.
Make sure that the RJ-50 GPI terminal block is inserted into the
GPI
port on
the rear panel. The sample pictures below illustrate tapping the wire on
position 1 to turn on the main tally for window 1.

Frame Lock
This allows you to turn on (with checkmark) or off the output display to be
synchronized with the input source. When frame lock is enabled, the
modules help maintain image continuity to create a virtual canvas. Click on
the item to toggle between on / off.