manualshive.com logo in svg

Avision FL-1507B, User Manual

Share
Download
Avision FL-1507B User Manual Download Page 47

User’s Manual

 

 

38 

 

4.3.2

 

Other Image Options 

 

Binarization  This is the process of converting a 

grayscale or color image to a bi-tonal 

image. There are several different 

methods of performing this conversion.  

Options:  Dynamic Threshold, 

Dynamic Threshold (AD), Fixed 

Processing, Halftone 1~5, Error 

Diffusion. 
Dynamic Threshold:  Selecting 

Dynamic Threshold allows the scanner 

to dynamically evaluate each document 

to determine the optimal threshold value 

to produce the highest quality image.  

This is used to scan mixed document 

containing faint text, shaded background, 

or color background with a single setting.  

If Dynamic Threshold is selected, 

Threshold, Brightness, and Contrast are 

not available. 

 

Dynamic Threshold (AD):  Selecting 

Dynamic Threshold (AD) to perform 

the enhanced mode of the Dynamic 

Threshold feature. However, using this 

mode may slow down your scanning 

speed. 

 

Sensitivity of Dynamic Threshold 

Occasionally your scanned image may 

contain small dots or speckles. To remove 

these spots, increase the sensitivity value 

by moving the bar to the right. The value 

ranges from 1 to 30.  The default is 20. 

 

 

Summary of Contents for FL-1507B
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands