Avision FL-1507B User Manual Download Page 128

Page: 128 / 151

User’s Manual

119

Check if the default settings meet your requirements. If not,

change the scan settings to fit your specific scanning task.

Item

Description

Resolution: Select your desired resolution.

The higher resolution, the greater the image

quality and disk space.
Choice: *150, 200, 300 dpi

Scan Size: Select your paper size or you may

choose Auto to let the scanner detect your

document size automatically.

Choice: *Auto size, A4, LTR (Letter), LGL

(Legal), 4x6, 5x7

File Format: Select the file format for your

image.
Choice: *JPEG, PDF, TIFF

Note:



The JPEG file does not support the B&W

image.



The TIFF file format supports only the

B&W image.

ATTENTION:

If the scanner is not found, please

check the followings:

The scanner is not ready yet.

Tap [More Settings] and then

[Search scanner] to search

the scanner again.

Check if the mobile device and

the scanner are in the same

wireless LAN.

Summary of Contents for FL-1507B
























































































































































Search results

Summary of Contents for FL-1507B

Reviews:

Brands by name

Popular brands

Avision FL-1507B, User Manual

Search results

Summary of Contents for FL-1507B

Reviews:

Brands by name

Popular brands